Skip to main content

You are viewing a project that is currently in draft state for the Standards Working Group in the Green Software Foundation. This project should not be considered finished or officially supported in any way by the Green Software Foundation or its members.

Stress Characterisation

Stress Characterisation

In short: this asks a second question on top of "how much water did this cost" — how much did it matter, given where it happened? A litre taken from a place with plenty of water counts for less than a litre taken from a place that's already running dry. One cubic metre consumed in a water-abundant region and one cubic metre consumed in a severely stressed basin are physically identical but represent very different pressures on the systems they came from. Stress characterisation is the mechanism that lets SWI reflect that difference.

Shape: for each place your water use happened, multiply the water used there by that place's scarcity score; add those all up; divide by the functional unit.

Worked: 150 L direct water used in Region A (scarcity score 1.2) + 270 L indirect water generated in Region B (scarcity score 3.5) → (150 × 1.2) + (270 × 3.5) = 180 + 945 = 1,125 stress-weighted litres ÷ 100,000 requests ≈ 0.01125 L per request (stress-adjusted) — compared to 0.0042 L per request unadjusted (420 ÷ 100,000) from the same operational totals. Geography alone changed the answer by more than 2.5×. (illustrative placeholder, not real data)

The mechanism​

A characterization factor, CF_b,i, is a dimensionless multiplier applied to a physical water volume to reflect the water-stress conditions of the region or watershed i where that water use actually occurred, for accounting basis b. Applying it converts an unadjusted, physical-volume result into a stress-adjusted one — the precise version of the formula above:

SWI_b^adj = sum over region i of (W_b,i × CF_b,i) / R
(for each basis b: c = consumption, w = withdrawal)

Setting CF_b,i = 1 for every region recovers the unadjusted result — but the specification is explicit that an unadjusted result must always be reported as a physical water intensity, never presented as if it were stress-adjusted.

Neither result replaces the other. The unadjusted metric supports basic physical water accounting and efficiency comparisons; the stress-adjusted metric supports interpreting that physical use in the context of local water conditions. Both are required or recommended reporting outputs (see the Specification's Reporting clause) precisely because they answer different questions.

  • AWARE is recommended for stress-adjusting water consumption (SWI_c^adj).
  • WRI Aqueduct is recommended for stress-adjusting water withdrawal (SWI_w^adj).

Both methods are scoped to freshwater only — a boundary decision discussed further on the Scope Boundary Decisions page. Whichever method is used, its version, geographic resolution, temporal resolution, and any mapping or aggregation assumptions must be disclosed alongside the result.

For the practical mechanics of applying these — where in the pipeline stress adjustment happens, at what geographic granularity, and at what temporal resolution — see Stress Characterisation — Practical Application.


Please submit any comments you have here.