Skip to main content

You are viewing a project that is currently in draft state for the Standards Working Group in the Green Software Foundation. This project should not be considered finished or officially supported in any way by the Green Software Foundation or its members.

Getting Started

Getting Started

In short: Software Water Intensity (SWI) measures how much water a piece of software cost, in the way it actually costs water — the water used to cool the data centre it runs in, the water used generating the electricity it consumed, and the water used building the hardware it runs on, all divided by however much work the software actually did. This site explains how to work that out in practice; the SWI Specification itself states the formal requirements.

This site is draft guidance. It is a Standards Working Group (SSWG) work item within the Green Software Foundation and is not yet officially endorsed. Content here — including page structure, worked examples, and data-source pointers — should be expected to change as the SSWG's work progresses.

What this site is​

This is the SWI Guidance site: a non-normative companion to the Software Water Intensity (SWI) Specification. It follows the same relationship the Green Software Foundation's SCI Guidance project has to the Software Carbon Intensity (SCI) specification: the specification states requirements; the guidance explains how to fulfil them, with explanation, worked examples, and data-source references.

The two documents are kept deliberately separate. Worked examples, diagrams, and data-source guidance need to be revised often — as new datasets appear, as methodology matures — without triggering the version-control obligations that apply to a normative specification. As the SSWG puts it: the specification states the principle; the guidelines explain how to fulfil it.

The SWI formula, at a glance​

SWI is a rate: the water attributable to a software system, expressed per functional unit.

SWI = W / R

Total water W is the sum of operational water and embodied water:

W = W_O + W_M

Every component is then quantified on both a consumption basis and a withdrawal basis, and reported both unadjusted (a physical water volume) and stress-adjusted (weighted by local water scarcity):

SWI_b = W_b / R
SWI_b_adj = sum over region i of (W_b,i × CF_b,i) / R
(for each basis b: c = consumption, w = withdrawal)

If any of that is unfamiliar, start with Formula Walkthrough, which breaks down every term, or jump straight to a worked example.

Where to go from here​


Please submit any comments you have here.